ij start canon ts3320 Setup

PRINTER UNBOXING AND INITIAL SETUP:

Unbox the printer and its accessories.

Remove all the packaging materials from the printer, as these protective materials will cause abrupt actions during the printer operations.

Firmly connect the power cord between the rear end of the printer and an electric outlet.

On the top of the printer, you will be able to see the power button. Press it once to turn on your Canon printer.

Now use the control panel to set your preferred language and time.

It’s time to take out your ink cartridges from the box (Black, Cyan, Yellow, and Magenta).

Install the cartridges into their respective slots.

Gently pull the input tray and load some paper.

Use the printer's control panel to print a test page.

This will help you analyze the quality of the printed document.

So, the basic unboxing and initial setup of your Canon printer are over.

Turn on your Canon printer and the computer to which you are going to establish a USB connection.
Make sure that you have a reliable USB connection.
Before establishing the USB connection, make sure you have downloaded the relevant software, drivers and firmware on your Windows or Mac computer.
The procedure for downloading and installing the printer drivers is pretty much straightforward.
You can install the drivers via the CD-ROM or download them from the manufacturer’s support page.
Begin the printer driver installation.
When you are prompted, choose USB as the connection type.
Connect the USB cable’s one end to your computer and the other end to the Printer’s rear end.
After the setup, you can print an alignment page to test the quality of your printed document.
These are the simple steps involved in the USB connection setup of your Canon TS3320 printer.

Switch on the printer; the display will show the reading Zero.
Press the Wireless button for about three seconds.
Now the printer is ready to connect with the Wi-Fi system (The Wi-Fi light starts blinking).
Go to your Android or iPhone device and download the Canon PRINT Inkjet/SELPHY application either from the Google Play Store or the Apple Store.
Open the Canon application on your smartphone.
Go to the settings page and tap on the printer's Wi-Fi name to establish a connection.
Usually, it doesn’t ask for the password. If it asks to enter the password, type 12345678 and tap on Connect.
The Canon app searches for your printer. Now it’s time to connect with your router’s network.
Select your wireless router from the list that needs to be connected with your Canon printer.
Enter the router password for a successful connection.
Once the smartphone and Canon printer are connected to the same network, the settings will pass on to your Canon printer.
The application will take about a few minutes to start communicating with your Canon printer.
Now you will see the printer image and photo at the bottom of the application's home page.
Using the Wi-Fi setup, you can perform all the printer operations (printing, scanning, and copying).
Now, you’ve successfully completed the ij start Canon TS 3320 printer setup in a more simplified manner.

Hopefully, the Canon PIXMA TR4520 printer setup is completed successfully.