Canon MG3200 Wi-Fi Setup

Connecting your Canon PIXMA MG3200 printer to other devices will enable you to print or scan directly from those devices. If you want to connect and print from your computer, you need to establish communication between your devices (printer and computer). In that case, use the wireless setup method, a quick and easy way to connect the devices without using a USB cable. By following the procedures provided in the upcoming sections, you can connect Canon MG3200 Wi-Fi Setup.

Printer's Control Panel Wi-Fi Settings

First, make sure that your wireless router or access point supports the WPS button.

Ensure to turn on your printer.

Hit and hold the Maintenance button on your PIXMA MG3200 printer’s control panel for about 5 seconds.

Now, the LED display will flash on the printer.

Press the Fit to Page button.

Again, the LED display will start to flash on your printer.

Immediately, press and hold the WPS button on your wireless router or access point.

Now, you will see a blue Wi-Fi lamp that flashes on your printer while searching for the wireless network.

When your printer is successfully connected to the wireless network, the LED display will light up for 3 seconds and then it will change to “1”.

Make sure that the Wi-Fi lamp is lit in blue on the Canon PIXMA MG3200 printer.

Connecting Your Printer And Computer Using The Installation Wizard

Before you start to connect your devices, make sure to download the respective printer driver on your device. Follow the below instructions to connect your printer to your computer using the wireless setup.

Make sure to complete the hardware setup of your printer.
Ensure to connect your computer to the same network as you have connected your printer.
Ensure that your machine is turned on.
In case you have the driver installation CD that came along with your printer package, use it on your computer and begin the driver installation process.
However, if you do not possess the installation CD, open the default browser on your computer and access the Canon printer’s official support page.
Here, navigate to your respective printer model (Canon PIXMA MG3200) and download the driver that is compatible with your computer’s Operating System.
After you finish the driver downloading process on your computer, double-click on the setup file to open it.
In the Welcome window, click the Next button.

Select your country or place of residence and click Next.
Review and accept the "END USER LICENSE AGREEMENT". Again, click on the Next button. Remember that if you click No, the installation will not proceed.
Wait patiently for some time to start the installation process.
In the Connection method window, select the “Use the printer with wireless LAN connection” option and click Next
Now, your computer will start to search for the Canon PIXMA MG3200 printer. Just perform the on-screen prompts to complete the wireless setup.
Once your Canon printer and computer are connected successfully, you will see the Setup Completion window.
Click on the Complete button.

You can connect your Canon PIXMA MG3200 Wifi Setup by following the above steps. In case you have any queries, reach our technical experts. You can use the call button provided on this page for this purpose.

Call Us